Recent Posts
-
![Meet TYM at K 2025 -The World’ s No.1 Trade Fair for Plastics and Rubber]()
Meet TYM at K 2025 -The World’ s No.1 Trade Fair for Plastics and RubberWelcome to the World’s No.1 Trade Fair for Plastics and Rubber -K 2025, taking place from October 8–15, 2025 at Messe Düsseldorf, Germany. As a professional LSR injection molding machine, mold, and robot solution provider, TYM Technology Co., Ltd. is proud to present our latest innovations at Booth 16E77.
09/23/2025
-
![Vacuum-Assisted Injection for Liquid Silicone: What It Actually Fixes, and Which Products Justify the Added Cost]()
Vacuum-Assisted Injection for Liquid Silicone: What It Actually Fixes, and Which Products Justify the Added CostVacuum-assisted injection reduces micro-bubbles in liquid silicone parts, but it's not worth the added cost for every product. Here's how to decide.
08/19/2026
-
![When Mold Temperature Controller and Injection Machine Fall Out of Sync: Why Parts Still Show Localized Under-Cure Even When]()
When Mold Temperature Controller and Injection Machine Fall Out of Sync: Why Parts Still Show Localized Under-Cure Even When "All Parameters Are Correct""All parameters correct" but still getting localized under-cure? Mold temperature controller and injection machine timing mismatch is a common hidden cause.
08/18/2026
-
![How Much A/B Mixing Ratio Error Causes Under-Cure in Liquid Silicone — and How Equipment-Level Monitoring Can Catch It]()
How Much A/B Mixing Ratio Error Causes Under-Cure in Liquid Silicone — and How Equipment-Level Monitoring Can Catch ItSmall A/B mixing ratio errors in liquid silicone can cause under-cured parts without visible warning. Learn the tolerance thresholds and equipment monitoring methods.
08/15/2026
-
![Injection Pressure / Servo Pressure Sensor Drift: How Often Should It Be Calibrated?]()
Injection Pressure / Servo Pressure Sensor Drift: How Often Should It Be Calibrated?Injection pressure and servo sensor drift can silently degrade LSR part quality. Learn the warning signs and a practical calibration schedule.
08/13/2026
-
![How to Verify Whether a Supplier's]()
How to Verify Whether a Supplier's "Parts Per Hour" Claim Includes Color or Mold Changeover TimeWhen comparing liquid silicone rubber (LSR) injection molding machines, almost every supplier quote includes a headline number: parts per hour, or cycles per hour. It looks like the easiest number to compare — until you realize it rarely means the same thing from one supplier to the next.
08/10/2026
-
Common Failure Modes in In-Mold Assembly (IMA) on Double-Color and Double-Material LSR Machines
In-mold assembly — molding a silicone component directly onto or around a second material within a single cycle — is one of the strongest arguments for double-color and double-material LSR machines. It eliminates a secondary bonding or assembly step, reduces labor, and improves consistency versus post-mold assembly. On paper, it sounds like a straightforward efficiency gain.
08/07/2026
-
Cold Runner Clogging in LSR Injection Molding: A Practical Troubleshooting Guide
Cold runner systems are one of the main reasons manufacturers choose liquid silicone rubber (LSR) injection molding over conventional runner designs — no gate vestige, no flash to trim, and lower material waste. But when a cold runner starts to clog, that advantage disappears fast: production stops, scrap rates climb, and every hour of downtime costs real money.
08/04/2026
-
![Pure Electric Servo Feeding System vs. Traditional Pneumatic Feeding: Which One Actually Saves You Money?]()
Pure Electric Servo Feeding System vs. Traditional Pneumatic Feeding: Which One Actually Saves You Money?If you run an LSR (Liquid Silicone Rubber) injection molding line, the feeding system is easy to overlook — until it starts costing you scrap rate, downtime, and inconsistent shot weights. Two technologies dominate the market today: pneumatic (air-driven) feeding systems and pure electric servo feeding systems. Here's an honest, practical comparison to help you decide which fits your production line.
07/31/2026
-
![How to Choose an LSR OEM Manufacturing Partner: A Buyer's Checklist]()
How to Choose an LSR OEM Manufacturing Partner: A Buyer's ChecklistOutsourcing liquid silicone rubber production is as much a relationship decision as a technical one. A supplier can look strong on paper — certificates, equipment lists, a polished website — and still fall short once your product hits real production volume. Here's a practical checklist for evaluating an LSR OEM partner before you commit tooling and inventory to them.
07/29/2026
What Custom Solutions Can Be Provided for LSR Molding?
How Can LSR Formulations Be Tailored to Specific Needs?
Custom LSR compounds can be engineered for properties like translucency, conductivity, flame retardancy, or specific durometers. Additives can introduce antimicrobial properties or modify processing characteristics like cure speed. Collaboration with material suppliers ensures formulations meet exact application requirements and regulatory standards.
What Specialized Mold Designs Are Possible with LSR?
LSR's flow properties enable micro-molding for tiny components and overmolding for complex assemblies. Multi-cavity and family molds maximize production efficiency. Hot runner systems eliminate sprues and runners, reducing waste. Inserts can be placed manually or automatically for hybrid part construction.
How Can Production Be Adapted for Unique Volume Requirements?
Flexible manufacturing cells can scale from prototype runs to high-volume production by changing mold configurations and adjusting machine settings. Quick-change tooling systems reduce setup times. Just-in-sequence delivery models synchronize production with customer demand, minimizing inventory costs while ensuring supply continuity.
What Post-Molding Services Enhance Value?
Secondary operations like pad printing, laser etching, and assembly can be integrated into the production workflow. Cleanroom packaging ensures contamination-free delivery for medical and pharmaceutical clients. Serialization and traceability services support regulatory compliance and supply chain transparency for critical applications.