+8615818122342 sales13@gdtym.com

Beyond Single-Shot: The Evolution of Multi-Material Molding Technologies

Home News

Recent Posts

Beyond Single-Shot: The Evolution of Multi-Material Molding Technologies

04/03/2026
LSR cures via an addition reaction, also known as hydrosilylation. This is fundamentally different from the radical-based peroxide cure used for High Consistency Rubber (HCR). The reaction involves a platinum-based catalyst facilitating the addition of a silicon-hydride (Si-H) group to a vinyl (C=C) group on another silicone polymer chain. This forms a direct silicon-carbon bond, cross-linking the polymer chains into a three-dimensional network.
The Two-Part System: LSR is supplied as a two-component system (A and B). Part A contains the vinyl-terminated polymers and the platinum catalyst. Part B contains the polymers with the Si-H crosslinker and an inhibitor. They are stored separately and only mixed in the precise 1:1 ratio at the machine's metering unit. The inhibitor temporarily prevents reaction at room temperature, giving the mixed material a usable "pot life."
The Cure Triggers: Heat and Kinetics. When heat is applied in the mold, the inhibitor is deactivated, and the platinum catalyst becomes active. The rate of this crosslinking reaction is not linear; it follows cure kinetics. Initially, the reaction is slow (induction period), then accelerates rapidly to a point of vitrification where the material solidifies, before slowing down as it reaches full cure. The mold temperature is the primary driver: too low, and the cure is incomplete, leading to poor physical properties; too high, and it can cause porosity (from by-product gases) or even "burn" the catalyst.
Post-Curing: The Invisible Step. Demolding the part does not mean the reaction is 100% complete. A post-cure—baking the parts in an oven—is often essential, especially for medical or food-grade applications. This process:

  1. Drives the cure to completion, maximizing tensile strength, tear strength, and compression set.

  2. Drives off any low molecular weight volatiles, which is critical for achieving the required levels of biocompatibility (e.g., USP Class VI) and preventing odor or taste transfer.

  3. Stabilizes the material's properties, ensuring they remain consistent over the product's lifetime.

Understanding this chemistry has direct practical implications:

  • Why vacuum degassing is needed: The mechanical mixing of A and B can introduce air, and the reaction itself can produce hydrogen gas. Trapped air causes bubbles. A vacuum applied to the mixing chamber or the mold itself removes these gases.

  • The danger of contamination: Substances like sulfur, tin, amines, and some plastics (like PVC) are "catalyst poisons." Even trace amounts from a dirty mixer, contaminated tools, or nearby processes can inhibit the platinum catalyst, leading to spots of uncured, sticky material.

  • The importance of temperature uniformity: A variation of just 5-10°C across the mold surface can lead to inconsistent cure states, causing differential shrinkage, warpage, or areas of weakness.

At TYM, we engineer Our process with this science in mind. We don't just set a mold temperature; we calculate the thermal profile needed to achieve the target degree of cure at the moment of ejection, based on the specific LSR grade's kinetic data. We design our molds with conformal cooling to ensure that temperature uniformity. We specify and integrate vacuum systems as standard for critical applications. And we provide clear post-cure protocols for every project. This scientific approach allows us to consistently mold LSR parts that don't just look good, but perform predictably and reliably in the field, meeting the most stringent application demands.